All Products
Showing 1–36 of 57 results
- Electrical, Electrical & Mechanical, Industrial Equipment & Materials, Industrial Materials, Solder Wire
0.8mm Solder Wire High Quality ( Small size )
DiscontinuedStock outElectrical, Electrical & Mechanical, Industrial Equipment & Materials, Industrial Materials, Solder Wire0.8mm Solder Wire High Quality ( Small size )
out of stock- 63/37 rosin core solder
- FLUX 2.0%
- Wire diameter: 0.8mm
- Melting point: 361°F/183°C
- Good solderability, insulation resistance, No spattering and Non-corrosive
- Widely used in electrical and electronics, solder parts like circuit board, electronics devices and others
SKU: EAP-000874 - Electronic Parts, Module, Wireless Module
4 Channel Remote Kit
42 in stock- No. of the channel: 4
- Operating mode: Non-Locking
- Receiver Operating voltage: DC 5V.
- Receiver sensitivity is: -98dB.
- Transmitter Operating voltage: DC 12V
- Transmitting frequency: 315 MHZ.
- Transmitter Operating current: 10mA at 12V.
- Transmitter Radiated power: 10mW at 12V.
- Transmission distance (m): 3 to 5.
SKU: EAP-000418 - Electronic Parts, Module, Power Supply Module
AMS1117-3.3V Voltage Regulator Module
51 in stock- 3.3V Output
- 5V Input. Can use higher input voltages, but see our notes below about derating the current at higher voltages
- 800mA maximum rated current. 500mA recommended max
- Power LED
- Short circuit and thermal protection built-in
- Small footprint
SKU: EAP-000880 - Electrical & Mechanical, Equipment & Instruments, Equipment & Tools, Industrial Equipment & Materials, Tools, Tools
Anti-static SMD Black Tweezer Non-magnetic (ESD-Series)
In StockElectrical & Mechanical, Equipment & Instruments, Equipment & Tools, Industrial Equipment & Materials, Tools, ToolsAnti-static SMD Black Tweezer Non-magnetic (ESD-Series)
in stock- Type: ESD10, ESD11, ESD12, ESD13, ESD14, ESD15
- Length: Approx. 12 .5CM-13.9cm
- It’s safe to pick up electronic components.
- Durable stainless steel material; Only the tweezer’s tips are non-magnetic.
SKU: n/a - Electronic Parts, Module, Power Supply Module
Breadboard Power Supply Module(3.3V, 5V)
16 in stock- Breadboard power supply module, compatible with 5V, 3.3V.
- Apply to MB102 breadboard
- Input voltage: 6.5-12 V (DC) or USB power supply
- Output voltage: 3.3V/5V can switch over
- Maximum output current: <700 ma
- Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
- On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.
SKU: EAP-000643 - Electrical & Mechanical, Equipment & Instruments, ESD & Cleanroom Supplies, ESD Mat, ESD Supplies
ESD Soldering Table Mat Anti-Static High Temperature Rubber (Type-Matt)
In StockElectrical & Mechanical, Equipment & Instruments, ESD & Cleanroom Supplies, ESD Mat, ESD SuppliesESD Soldering Table Mat Anti-Static High Temperature Rubber (Type-Matt)
in stock- Prompt static discharge through 2 layers composition to prevent an accident from static charges.
- Ideal to install on a table & floor.
- High Quality Material, Flatness and abrasion resistant
- Easy to cleanroom and maintain
- Can be used for a long time without any smell
- Available in various color
SKU: n/a - Component, Electronic Parts, Integrated Circuits(ICs)
ESP8266 Chip IC (ESP-12E)
11 in stock- Module with ESP8266 system
- Supply voltage: 3.3V
- Frequency: 2.4 GHz
- Transmitted power level: +25 dBm
- It has a microstrip antenna
- WiFi standard – 802.11 b/g/n
- Connections: 9 GPIO ports, 1 ADC port, UART
- Interface :UART
- Supply voltage: 3.3V
- Dimensions: 24 x 16 [mm]
SKU: EAP-000927 - Component, Electronic Parts, Integrated Circuits(ICs)
ESP8266 Chip IC (ESP-12F)
15 in stock- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: EAP-000347 - Electronic Parts, Module
IR Infrared Obstacle Avoidance Sensor Module
186 in stock- Main Chip: LM393
- Operating Voltage (VDC): 3.6 ~ 5
- Average Current Consumption (mA): 0.06
- Detection Angle: 35 °
- Distance Measuring Range (CM): 2 ~ 30
- Dimensions (mm) LxWxH: 48 x 14 x 8
- Weight (gm): 5
- Shipment Weight: 0.01 kg
- Shipment Dimensions: 5 × 4 × 1 cm
SKU: EAP-000658 - Electrical, Electrical & Mechanical, Equipment & Instruments, Tools
MB-102 Breadboard (830 Points)
In StockElectrical, Electrical & Mechanical, Equipment & Instruments, ToolsMB-102 Breadboard (830 Points)
35 in stock- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
SKU: EAP-000371 - Electronic Parts, Module
Sensor Shield V5 Expansion Board For Arduino
out of stock- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless modules communication interface
- RB URF v1.1 ultrasonic sensors interface
SKU: EAP-000699 - Industrial Equipment & Materials, Packaging Materials, Packaging Supplies
Stretch Film / Shrink Wrap
Stock outIndustrial Equipment & Materials, Packaging Materials, Packaging SuppliesStretch Film / Shrink Wrap
out of stock- 15 Microns x Width – 500mm x Length – 300meter
- Weight 2.3kg
- Better puncture resistance
- Not easy to break
- Can stretch over 150%
- Protects your stock on pallets from moisture and dust
- Not for wrapping food
- It is the most economical method of unitizing.
- It provides protection from dust and damage methods.
- Its ability to identify the product while also keeping it clean.
SKU: EQT-000081