-
×
Stepper Motor + ULN2003 Driver Module
1 × 7,900 Ks
Subtotal: 7,900 Ks
Electronic Parts, Module, Motor Driver Module
TMC2208 Stepper Motor Driver Module
Availability:
In stock
- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
19,400 Ks
In stock
The latest version of the TMC2208 V2 takes the UART out and uses the UART function directly, eliminating the need for more wiring.
Flexible micro Plyer interpolation unit, the component can provide up to 256 micro step / step resolution, even in the pulse rate is limited system can still be perfect to achieve sinusoidal control; As stealth chip, fine music technology is widely used in 3D printing, so These components are also designed to be compatible with existing 3D printer electronics, eliminating the need for costly redesign. Both components have pulse/direction input, can be a completely independent operation. The configuration is implemented via a digital input.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
9 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 -
Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
1 in stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 -
Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
37 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 -
Electronic Parts, Module, Detection & Sensor Module
DHT11 Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleDHT11 Temperature and Humidity Sensor Module
76 in stock- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation)
- Temperature measuring range: 0~+50degree
- Humidity measurement accuracy: ±5.0%RH
- Temperature measurement accuracy: ±2.0degree
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
SKU: EAP-000003
There are no reviews yet.