No products in the cart.
Electrical, Electrical & Mechanical, Electronic Parts, Pump
Submersible Mini Water Pump (5V, White)
Availability:
In stock
- Voltage Range: DC 3-5 V
- Working current: 130-220mA
- Rated Voltage: DC 3V / DC 4.5V
- Load rated current: 0.18A
- Maximum lift: 40-110cm / 15.75″-43.4″
- Flow rate: 80-120L/H
- No load of water discharge capacity: 100L/H
4,100 Ks
In stock
Motor water pumps is made from good quality plastic, which is anti aging, long lasting and durable.
Mini submersible pump, small water pump, long lead, large flow, low noise, low voltage.
Small size ensures easy installation compact size, humanized design, easy to install, compact size and high efficiency
Mini water pump wide application: Can be used in fish tank, solar water, fountain, aquarium and so on.
Warm tips:The water quality should be kept clean to avoid blocking the rotor of the water pump; The water pump should be cleaned regularly to keep the water pump clean; Install the water pump and put it into the water. The water level should be higher than the water pump. If the water level is too low, the temperature of the water pump will be too high and the noise of the water pump will be too high.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, LCD Display Module
16×2 LCD Display Module + I2C Expander Module
in stock- Arduino IIC/I2C interface was developed to reduce the IO port usage on Arduino board
- I2C adapter allows flexibility in connections
- I2C Reduces the overall wirings
- 16 characters wide, 2 rows
- White text on the green background
- Single LED backlight included can be dimmed easily with a resistor or PWM.
SKU: n/a - Electronic Parts, Module, Relay Module
1 Channel Relay Module (5V,10A)
52 in stock- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for avoidance of malfunction
- Power supply indicator lamp
- Control indicator lamp
- Indicator for Relay output status
- Can Be controlled various appliances & other Equipment With Large current.
- Standard TTL Level logic controlled (AVR, Arduino, 8051, PIC, ARM)
- The module is compliant with international safety standards, control and load areas isolation trenches.
SKU: EAP-000013 - Electronic Parts, Module, Relay Module
8 Channel Relay Module (5V,10A)
29 in stockDC or AC signal, control, you can control the 220V AC load;
There is a normally open and one normally close contact;
The module is compliant with international safety standards, control and load areas isolation trenches.SKU: EAP-000010 - Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
28 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012
There are no reviews yet.