-
×
HC-SR501 PIR Motion Sensor Module
1 × 4,800 Ks
Subtotal: 4,800 Ks
Component, Electronic Parts
DC Relay (10A)
Availability:
In stock
- SRD-03VDC-SL-C-DIP-5(3V)
- SRD-05VDC-SL-C-DIP-5(5V)
- SRD-06VDC-SL-C-DIP-5(6V)
- SRD-09VDC-SL-C-DIP-5(9V)
- SRD-12VDC-SL-C-DIP-5(12V)
- SRD-24VDC-SL-C-DIP-5(24V)
- SRD-48VDC-SL-C-DIP-5(48V)
- SRD-24VDC-SL-C-DIP-4(24V)
1,200 Ks – 3,500 Ks
| Voltage | 3V, 5V, 6V, 9 V, 12V, 24V, 48V |
|---|---|
| Pin | 5 Pin, 4 Pin |
- SRD-03VDC-SL-C-DIP-5(3V)
- SRD-05VDC-SL-C-DIP-5(5V)
- SRD-06VDC-SL-C-DIP-5(6V)
- SRD-09VDC-SL-C-DIP-5(9V)
- SRD-12VDC-SL-C-DIP-5(12V)
- SRD-24VDC-SL-C-DIP-5(24V)
- SRD-48VDC-SL-C-DIP-5(48V)
Based on 1 review
Only logged in customers who have purchased this product may leave a review.
Related products
-
Electronic Parts, Development Board, STM
STM32F103C8T6 ARM Development Board
7 in stock- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: EAP-000021 -
Detection & Sensor Module, Electronic Parts, Module
Raindrop Detection Sensor Module
108 in stock- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001 -
Electronic Parts, Module, Relay Module
2 Channel Relay Module (5V,10A)
27 in stock- Switching mains loads
- Home automation
- Battery backup
- High current load switching
- Supply voltage – 3.75V to 6V
- Trigger current – 5mA
- Current when relay is active – ~70mA (single), ~140mA (both)
- Relay maximum contact voltage – 250VAC, 30VDC
- Relay maximum current – 10A
SKU: EAP-000012 -
Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
9 in stock- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007
Ivan Saw Naing (verified owner) –
It is very convenient to use and price is reasonable.
Ivan Saw Naing –