-
×
DHT11 Temperature and Humidity Sensor Module
1 × 4,300 Ks
Subtotal: 4,300 Ks
Arduino, Development Board, Electronic Parts
D1 Wemos Mini ESP8266 Development Board
Availability:
In stock
- D1 Mini is mini WiFi board based on ESP8266
- Compatible with MicroPython, Arduino, nodemcu
- 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
- 1 analog input (3.3V max input)
- Built In USB-C Port
- On board reset button & LED on pin D4(GPIO2)
12,400 Ks
In stock
ESP 8266 D1 mini development board is based on ESP-8266EX chip and is useful for applications that need wireless data transmission. Immerse yourself into the IoT world at minimum cost.
With an ESP8266 the possibilities of different projects is enormous.
Another device to expand your home automation to another level using ESPHome, Tasmota, MicroPython or any programing languages of your choice.
This very small board comes with a Micro-USB interface the board can be powered directly from the USB port, and it works very well with the Arduino IDE.
Features:
11 digital IO, interrupt / PWM/ I2C /one-wire supported (except D0)
1 analog input (3.2V max input)
A Micro USB connection
Compatible with MicroPython, Arduino, NodeMCU
- Chip: ESP-8266EX
- Compatible with Arduino IDE
- Compatible NodeMCU firmware
- GPIO pins: 11
- 1 pin ADC (0 V to 3.3 V)
- Operating Frequency: 80 / 160 MHz
- Flash Memory: 4MB
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Electronic Parts, Module, Detection & Sensor Module
MFRC-522 RFID Reader Module
37 in stock- RC522 Features
- 13.56MHz RFID module
- Operating voltage: 2.5V to 3.3V
- Communication : SPI, I2C protocol, UART
- Maximum Data Rate: 10Mbps
- Read Range: 5cm
- Current Consumption: 13-26mA
- Power down mode consumption: 10uA (min)
SKU: EAP-000005 -
Electronic Parts, Module, Relay Module
4 Channel Relay Module (5V,10A)
out of stock- Useful for appliance control
- DC or AC signal, control, you can control the 220V AC load
- There is a normally open and one normally close contact
- The module is compliant with international safety standards, control and load areas isolation trenches
SKU: EAP-000011 -
Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32 Development Board with 1.14 Inch LCD
Stock outElectronic Parts, Development Board, ESPRESSIF(ESP)ESP32 Development Board with 1.14 Inch LCD
out of stock- Wi-Fi Mode Station/SoftAP/SoftAP+Station/P2P
- Security mechanism WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type AES/RSA/ECC/SHA
- Firmware upgrade UART download/OTA（Through network/host to download and write firmware）
- Software Development Support cloud server development /SDK for user firmware development
- Networking protocol IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
- User Configuration AT + Instruction set, cloud server, android/iOSapp
- OS FreeRTOS
SKU: EAP-000022 -
Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
In StockElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
1 in stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607
There are no reviews yet.