The 4 in 1 USB Adapter Board: Streamline USB connections with Micro USB, Type-C, Male, and Female interfaces in a single, versatile board. Simplify your electronics projects.
Electronic Parts, Module
4 In 1 USB Adapter Board
SKU: EAP-001117
Availability:
In stock
- Micro USB, Type-C
- USB male to female
- 2.54MM-4P (VCC/D-/D+/GND)
3,700 Ks
In stock
Based on 0 reviews
0.0 overall
0
0
0
0
0
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, OLED Display Module
TM1637 Clock Display Module
9 in stock0 out of 5(0)- Ease to use.
- Ease of multiplexing.
- Can use as a 4 digit display unit.
- Can use as a clock display.
- DIY clock project.
- 4 digit display unit.
- Electrical/Electronic projects.
- The counter project using 7 segment display.
- 4 M2 screws positioning holes for easy installation
SKU: EAP-000007 - Detection & Sensor Module, Electronic Parts, Module
Raindrop Detection Sensor Module
107 in stock0 out of 5(0)- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001 - Electronic Parts, Module
YX5300 Mp3 Music Player Module
15 in stock0 out of 5(0)- Voice Broadcasting of Vehicle Navigation
- Highway transportation inspection and toll station voice prompt
- Voice prompts for safety inspection of railway stations and bus stations
- Voice prompt of electric power, communication and financial business hall
- Verify the voice prompt in and out of the vehicle passage
- Voice prompt of frontier inspection channel of public security
- Voice notice for safe driving of electric sightseeing car
- Automatic alarm of mechanical and electrical equipment failure
- Fire sound alarm prompt
- Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support file format:MP3/WAV
- Support Micro SD card, Micro SDHC Card
- 30 class adjustable volume
- UART TTL serial control playback mode, baud rate is 9600bps
- Power supply can be 3.2 ~ 5.2VDC
- Size:43mm x 25mm
SKU: EAP-000008 - Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
out of stock0 out of 5(0)- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607
There are no reviews yet.