No products in the cart.
Component, Electronic Parts, LED & Optoelectronics
3mm LED
Availability:
In stock
3mm LED
- Multicolor x 50Pcs
- White x 10Pcs
- Blue x 10Pcs
- Yellow x 10Pcs
- Green x 10Pcs
- Red x 10Pcs
600 Ks – 2,500 Ks
3mm RED LED
| Color | Red |
| Size | T1 (3mm) |
| Case color | Red (diffused) |
| Brightness | 12-30 mcd |
| Wavelenght | 635 nm |
| Max forward current | 20 mA (continuous) |
| Max reverse voltage | 5 VDC |
| Foward voltage | 1.8 VDC (typ) |
3mm GREEN LED
| Color | Green |
| Size | T1 (3mm) |
| Case color | Green (diffused) |
| Brightness | 4-18 mcd |
| Wavelenght | 568 nm |
| Max forward current | 20 mA (continuous) |
| Max reverse voltage | 5 VDC |
| Foward voltage | 2.2 VDC (typ) |
3mm YELLOW LED
| Color | Yellow |
| Size | T1 (3mm) |
| Case color | Yellow (diffused) |
| Brightness | 4-18 mcd |
| Wavelenght | 590 nm |
| Max forward current | 20 mA (continuous) |
| Max reverse voltage | 5 VDC |
| Foward voltage | 2.1 VDC (typ) |
3mm BLUE LED
| Color | Blue |
| Size | T1 (3mm) |
| Case color | Blue (diffused) |
| Brightness | 450-550 mcd |
| Wavelenght | 465-470 nm |
| Max forward current | 20 mA (continuous) |
| Foward voltage | 2.8 VDC (typ) |
| View angle | 55-65 degree |
| Color | Multicolor x 50Pcs, White x 10Pcs, Blue x 10Pcs, Yellow x 10Pcs, Green x 10Pcs, Red x 10Pcs |
|---|
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32-Cam Development Board
11 in stock- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
SKU: EAP-000024 - Detection & Sensor Module, Electronic Parts, Module
Raindrop Detection Sensor Module
111 in stock- The LM393, use of the wide voltage comparator
- Provide both digital and analog output
- Output LED indicator
- Compatible with Arduino
- TTL Compatible
- The sensor uses the high-quality FR – 04 double material, the large area of 5.5*4.0 CM
- Treatment of nickel plating and surface, have fight oxidation, electrical conductivity, and life has more superior performance
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15mA
- With potentiometer sensitivity adjustment
- The output format: digital switch output (0 and 1) and analog AO voltage output;
- Has a fixed bolt hole, convenient installation
SKU: EAP-000001 - Electronic Parts, Module, Detection & Sensor Module
HTU21D Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleHTU21D Temperature and Humidity Sensor Module
22 in stock- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002
There are no reviews yet.