Hakko

Adaptable to suit your workspace

• Vertically mounted: Can absorb widespread smoke.
• Horizontally mounted: Powerful absorption at closer area with high flow rate. Because of low height, it gives less shade keeping your working area light.
• Using a stand: When sufficient space cannot be found or to absorb smoke from upper areas:

Significantly-reduced footprint
The FA-400 takes up less space on your workbench. The footprint was reduced by approx. 50% when mounted vertically and by 20% when mounted horizontally compared to our previous model, the HAKKO 493. The height was also reduced by approx. 20%. (Units: mm)

Maintenance
The absorption force at the filter decreases gradually over time as the absorber is used. When the filter surface becomes completely white, the filter should be replaced.
Note: Be careful that moisture does not get on the filter.

• User-friendly design
  • A user-friendly pad secures pass/fail judgement on a wrist strap.
  • A banana jack on the front panel makes it easy to plug and unplug a wrist strap.

  Indication of test result by LED and buzzer

  • Highly visible LED lamps and buzzer will indicate test result.
  • Results: Low, Pass or High
  • *Buzzer sounds only for “PASS”.

  Dedicated holder included
  A mounting holder can make it easy to plug and unplug even with one hand. No tool is required to remove a unit. A unit can be portable off the holder.

  Connection patterns
  There are several connection patterns to choose depending on wrist straps.

• Automatic measurement to standardize the process
• Automatic temperature measurement
• Measurement counter can be useful for control of changing sensor.
• Long life sensor AS5000 (with certificate of conformance) is equipped as standard.

• Easy-to-operate 4-axis + 1 (feeder) control soldering robot system
• Time-reduced programming work and excellent operability
• Useful functions to stabilize the soldering quality
• Soldering work and efficiency improvement

• Economical and easy to use desoldering wire
• Through hole solder removal
• Bridging solder removal
• Halogen-free low-residue flux coated desoldering wire
• Using ESD SAFE package

• Adjustable temperature control : 100ºC-540ºC
• Air volume selector switch with ultra-light setting.
• ESD design and grounding measure to minimize damage from current leakage and electrostatic discharge.
• Soldering and desoldering of small surface-mounted chip components.
• Shrinking tubing, heating tests and local heating operations.