ESPRESSIF
Showing all 10 results
- Component, Electronic Parts, Integrated Circuits(ICs)
ESP8266 Chip IC (ESP-12F)
15 in stock- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: EAP-000347 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP8266 Development Board (CP2102, Type C)
In StockDevelopment Board, Electronic Parts, ESPRESSIF(ESP)ESP8266 Development Board (CP2102, Type C)
5 in stock- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: EAP-001281 - Electronic Parts, Module
ESP8266 Serial Port Baseboard Lua WIFI Development Board
4 in stock- Lead-out all the IO ports of the ESP-12E development board
- Lead out the pins of 5V and 3.3V power supply
- Convenient to connect with peripheral modules
- Onboard 5V / 1A DC-DC step-down converter circuit
- Onboard power indicator
- With DC power jack 6-24V.
SKU: EAP-000759 - Electronic Parts, Module, Wireless Module
WIFI Transceiver Wireless Module ESP8266 (ESP-01)
65 in stock- SDIO 2.0, SPI, UART 32-pin QFN package
- Integrated RF switch, blain, 24dBm PA, DCXO, and PMU
- Integrated RISC processor, on-chip memory and external memory interfaces
- Integrated /baseband processors
- Quality of Service management
- I2S interface for high fidelity audio applications
- On-chip low-dropout linear regulators for all internal supplies
- Proprietary spurious-free clock generation architecture
- Integrated WEP, TKIP, AES, and WAPI engines
SKU: EAP-000596 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP32 Development Board
out of stock- Built in Wi-Fi module of standard 802.11
- Wi-Fi module operate in range of 2.4 GHz – 2.5 GHz
- Three modes of operation: 1. Access point. 2. Client. 3. Access point + station
- Dual core microprocessor of 32 – bit
- Operating voltage is 3.3 V
- Clock frequency from 80 MHz and goes up to 240 MHz
- SRAM memory is of 512 KB
- ROM memory is 448 KB
- External flash memory is supported and is up to 32 Mb i.e. 4MB
- Maximum current in each pin is 12 mA but 6 mA is recommended to use
- It has 36 general purpose input / output pins
- General purpose input / output pins comes up with PWM / I2C and SPI functionality
- Bluetooth version 4.2 is available and Bluetooth low energy (BLE) version
- 2 to 3.6 V operating voltage
- Deep sleep current of 2.5 µA
- 10 electrode capacitive touch support
- Hardware supported encryption for AES, ECC, RSA – 4096, SHA2
- On board PCB antenna or IPEX connector which act as external antenna
- Operating temperature lies in range of -40°C to +125°C
SKU: EAP-000025 - Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32 Development Board with 1.14 Inch LCD
Stock outElectronic Parts, Development Board, ESPRESSIF(ESP)ESP32 Development Board with 1.14 Inch LCD
out of stock- Wi-Fi Mode Station/SoftAP/SoftAP+Station/P2P
- Security mechanism WPA/WPA2/WPA2-Enterprise/WPS
- Encryption Type AES/RSA/ECC/SHA
- Firmware upgrade UART download/OTA(Through network/host to download and write firmware)
- Software Development Support cloud server development /SDK for user firmware development
- Networking protocol IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
- User Configuration AT + Instruction set, cloud server, android/iOSapp
- OS FreeRTOS
SKU: EAP-000022 - Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32 Development Board with SIM800L V1.3
DiscontinuedStock outElectronic Parts, Development Board, ESPRESSIF(ESP)ESP32 Development Board with SIM800L V1.3
out of stock- Wi-Fi mode: Station/SoftAP/SoftAP+Station/P2P
- Security mechanism: WPA/WPA2/WPA2-Enterprise/WPS
- Encryption type: AES/RSA/ECC/SHA
- Firmware upgrade: UART download/OTA(Through network/host to download and write firmware)
- Software development: Support cloud server development /SDK for user firmware development
- Networking protocol: IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT
- User configuration: AT + Instruction set, cloud server, android/iOSapp
- OS: FreeRTOS
SKU: EAP-000023 - Electronic Parts, Development Board, ESPRESSIF(ESP)
ESP32-Cam Development Board
9 in stock- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
SKU: EAP-000024 - Development Board, Electronic Parts, ESPRESSIF(ESP)
ESP8266 Development Board (CP2102)
20 in stock- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- Onboard USB to serial chip to easily program and upload codes from the Arduino IDE
- Embeds logic level converter circuits
- Has onboard 3.3V regulator to ensure enough power to function as your go-to WiFi chip!
- Easy access to the GPIO pins for easy prototyping
- ESP-12E Processor
- Easy to use breadboard friendly form factor
SKU: EAP-000026