No products in the cart.
Battery Charging Module, Electronic Parts, Module
MH-KC24 QC3.0 QC2.0 Fast Charging Module
Availability:
Out of stock
- Supports multiple fast charging protocols.
- Input over-voltage, over current, and under-voltage protection.
- Output overcurrent, short circuit protection
- Module over-temperature protection.
- Used to charge solar mobile phone, car charging retrofit, driving recorder power supply, home power conversion, etc.
3,800 Ks
Out of stock
This is a buck module that is used to charge a phone via a USB port. The module supports Quick Charge 3.0 and accepts input from 12V to 24VDC. The module is based on the IC IP6505, which is a step-down converter with an integrated synchronous switch.
- Input voltage: 6V-32V.
- Output voltage: default 5V, automatically adjusts between 3-12V after triggering fast charge.
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Output cable voltage compensation function.
- Conversion efficiency: 90% ~ 97%.
- Support multiple fast charging protocols.
- Input overvoltage and undervoltage protection.
- Input overcurrent protection.
- Output overcurrent, short circuit protection.
- Machine over temperature protection.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607 - Electronic Parts, Module, OLED Display Module
0.96 OLED Display Module (128×64) (Blue)
out of stock- Work perfectly well without the need of back light.
- 128*64 high resolution, ultra wide viewing angle
- Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
- Fully compatible with multiple controlling chips including Arduino and more.
- Support a wide range of voltage input
SKU: EAP-000019 - Electronic Parts, Module, LCD Display Module
20×4 Character LCD Display Module (Blue)
20 in stock- LCD display module with blue backlight
- It can display 4-lines * 20-characters
- Small and light appearance, it is easy and convenient to use
- Suitbale for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
SKU: EAP-000016
There are no reviews yet.