No products in the cart.
Electronic Parts, Module, Power Supply Module
UPS Module (5V,1A)
Availability:
In stock
- Input: above 5V1A
- Output: 5V1A (max)
- Battery: polymer lithium battery, 18650 lithium battery. (The recommended capacity is below 10000ma)
- Input terminal: reverse connection protection, input overvoltage protection, automatically cut off the input power when the input exceeds 6V and switch to battery power supply mode.
- Battery terminal: Reverse connection protection Short circuit protection Reverse connection will not be damaged during charging. When the external power input exceeds 20v, the protection unit will be broken down.
- Output terminal: It can only supply ordinary loads, and cannot be connected to other power adapters, and it will burn if connected reversely. The output is short-circuited and it will not sleep when the load is small.
- Size: 33*17mm
4,600 Ks
In stock
- Input mode: IN+input+, IN-input-
- Output mode: OUT+output+, OUT-output-
- Battery: B+ connects to battery+, B- connects to battery –
Indicator light (need to be added by yourself): R+ is the working state of the external power supply, G+ is the battery capacity indicator. The battery capacity is displayed by the frequency of flashing. The faster the flashing, the more sufficient the battery capacity, and it will automatically turn off when it is empty or not charged.
Jumper (J1) description: Used to set the power of the external power supply. The default is below 1A. When the jumper is short-circuited, the output power of the external power supply must reach 5v 2A. The jumper is to switch 0.5A/1A current and supply the load first , The remaining current is transferred to the battery for charging.
Note:
The circuit board heats up when charging, so the circuit board needs to keep a distance from the battery when assembling. Secondly, the battery is optimistic about the polarity. Please do not connect it in reverse to avoid damage to the management chip. When the circuit is working while charging, there is no short circuit protection. So as not to damage the device.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
- Electronic Parts, Module, LCD Display Module
20×4 LCD Display Module + I2C Expander Module
in stock- 2004 204 20X4 Character LCD Display Module Blue Backlight
- Blue & Green backlight
- Fully assembled and tested Serial LCD 20×4 Module
- Display Format: 20 Characters x 4 lines
- Supply voltage: 5V
- The module can be easily interfaced with a MCU
- The module is a low-power consumption character LCD Module with a built-in controller
SKU: n/a - Electronic Parts, Module, Detection & Sensor Module
HTU21D Temperature and Humidity Sensor Module
In StockElectronic Parts, Module, Detection & Sensor ModuleHTU21D Temperature and Humidity Sensor Module
22 in stock- Uses the I2C interface
- Typical humidity accuracy of ±2%
- Typical temperature accuracy of ±0.3C
- Operates from 0 to 100% humidity but this sensor isn’t recommended for harsh environments where it could come in contact with water (such as rain)
- 3.3V sensor – use inline logic level converters or 10k resistors to limit 5V signals
- Only one HTU21D sensor can reside on the I2C bus at a time
SKU: EAP-000002 - Electronic Parts, Module, LCD Display Module
20×4 Character LCD Display Module (Blue)
20 in stock- LCD display module with blue backlight
- It can display 4-lines * 20-characters
- Small and light appearance, it is easy and convenient to use
- Suitbale for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
SKU: EAP-000016 - Electronic Parts, Development Board, Raspberry Pi
Raspberry Pi Pico RP2040 Programming Development Board
Stock outElectronic Parts, Development Board, Raspberry PiRaspberry Pi Pico RP2040 Programming Development Board
out of stock- RP2040 microcontroller chip designed by Raspberry Pi
- 264KB of SRAM, and 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Accurate clock and timer on-chip
- Onboard temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
SKU: EAP-000607
There are no reviews yet.